Things to Consider When Upgrading Laser Engraving Software

Software upgrades to laser marking machines require a thorough check of the machine's compatibility with the new software, and the backing up of all parameters. During the upgrade process, it is necessary to ensure that power supply is stable and all safety software is shut down. After the upgrade is complete, it is necessary to conduct basic function tests and material-specific verification.It is especially important to pay attention to the compatibility of different versions, and if any abnormalities are encountered, the user should immediately return to a previous version and contact technical support to avoid affecting normal production.

Preparations for the next level.

Confirm the model number.

It's like checking the model number when you update the software on a mobile phone. Once you've connected the equipment, you first have to check whether the software version is compatible with the current model.Don't be in a hurry to click the "upgrade now" button, because sometimes the new version may not be compatible with older hardware.

Backup the current configuration.

We suggest that people get into the habit of backing up their data before upgrading, and saving their focus and power settings separately.In the past, I had a friend who upgraded his computer and reset the parameters, and the result was a total loss of control over the quality of the engraving.

Things to be noted during the upgrading process.

Maintain stable power supply.

The most important thing to do when upgrading is to make sure that the power doesn't go out unexpectedly.Last week we ran into a case where a sudden surge in the workshop damaged the firmware and caused a two-day delay in production.

Turn off your antivirus software.

Some security software will intercept the upgrade package as a suspicious file, and I've had the upgrade process interrupted several times.It's better to turn the firewalls to silent mode in advance.

A new level of verification.

Basic functional testing.

First, don't rush to start production.The key is accuracy and response speed. Once, after an upgrade, the Y axis moved 0.3 seconds slower.

Testing the material.

Especially if you have worked with different materials such as metal and plastic, remember to use scrap to test the engraving.After the last update, there was a hidden bug. When you etched the anodized aluminum, the letters would turn white.