Three Techniques for Extending the Lifespan of Your Laser Equipment

Mastering the proper daily cleaning techniques for laser equipment, learning to adjust work parameters according to the characteristics of the materials, and establishing a scientific replacement schedule for parts are three maintenance methods that can effectively extend the life of the equipment.Regular cleaning to avoid damage to optical components, reasonable control of workload to prevent overheating, and the use of original factory parts to ensure system stability all contribute to keeping laser equipment in top working condition. This not only lowers the risk of accidental breakdowns, but also saves on repair costs.

Regularly clean the inside of the equipment.

Don't underestimate the "soft killer" that is dust. The lenses and tracks of laser equipment are especially susceptible to dust.The optical elements should be cleaned with a specialized air gun once a week, while the rails should be wiped with cotton swabs dipped in alcohol.Don't use ordinary paper towels to wipe the lens, because they will leave small fibers that will affect the accuracy of the laser beam.

Set reasonable work parameters.

Power is adjusted according to the material.

The power needed to engrave stainless steel is quite different from that needed to engrave wood.When using the laser, first adjust the power to 70 % of the recommended value and run it for a while, then gradually increase it. This protects the laser tube and saves electricity.

Regulate the length of time worked in succession.

Equipment, like people, needs a rest.He suggests a 15-minute break for every two hours of work, and in the hot summer months that should be shortened to every 1.5 hours.If you see the cooling fans slow down, you should immediately turn off the machine and check it.

Plan for the replacement of easily damaged parts.

Establish a parts replacement record.

They also set up "health records" for each laser tube and mirror, recording the date of installation and the duration of use.For example, the average lifespan of a CO2 laser tube is about 2000 hours, so having spares on hand can prevent a sudden shutdown.

Choose original manufacturer-approved cartridges.

Don't be tempted to use substitute materials. We've been there.Once we tried a laser head from a secondary manufacturer. The result was that the laser beam spread out in three months. The cost of returning it for repair was three times more than we had saved in the first place.