Key Points for Disinfection and Protection in Laser Medical Labeling Workshops

Medical laser marking workshops must have strict disinfection systems in place, with no slackness allowed in any aspect of environmental cleaning or equipment maintenance.The key is to control the ultraviolet sterilization process, and to properly manage the tools. Workers must wear protective clothing, and special attention should be paid to cleaning the laser lenses and to managing the materials. This will ensure that the marking process meets medical hygiene standards, and will prevent the risk of cross-contamination.

The environment requirements of the laser marking workshop for medical use.

Medical products have strict standards for cleanliness, so the workshop must maintain a constant air flow, and it is best to install professional purification equipment.Don't use materials that are prone to collecting dust on walls or floors, and don't use a regular mop to clean floors. Instead, use a microfiber mop with disinfectant.

Daily cleaning of the equipment operation area.

The operating table is wiped down with 75 % alcohol before the end of each day, and no nook or cranny is left untouched.The air vents on the marking machine are easily clogged with dust, so I clean them twice a week with a small brush. Otherwise, the machine will overheat and affect the precision of the markings.

disinfecting and protecting is the core of the process.

The ultraviolet light must be placed in an unobstructed area and turned on half an hour before the factory starts work.For example, it's much more effective to soak small tools like tweezers or clamps in disinfectant for 20 minutes and dry them than to spray them with alcohol.

Personal protection of staff.

Wearing a common mask is not enough. It is suggested that people use KN95 level protective equipment.You should wear gloves made of nitrile rubber, which are anti-static, and don't easily tear.

The maintenance of equipment and the management of expendable materials.

The lenses must be cleaned once a week with a professional cleaner, and when cleaning them, remember to wear a dust-free finger cot.Ink and toner cartridges should be stored in three categories: unopened, opened, and to be discarded.