How to Extend the Life of Medical Lasers

The long-term stable operation of medical laser equipment cannot be separated from scientific maintenance. From the daily cleaning of lenses, to controlling the temperature and humidity of the environment, to the regular calibration of the optical system, every step directly affects the lifespan of the equipment.By replacing vulnerable components and following standardized procedures, they can ensure the accuracy of the equipment and avoid costly repairs.Establish a preventive maintenance program to keep precision equipment in top working condition.

Daily cleaning and inspection are key.

Don't underestimate the impact of dust on precision equipment. After each use, remember to wipe the laser head and protective lens with a dust-free cloth.It's just like cleaning your glasses: the light path system must be kept clean to guarantee the accuracy of the marking.Every week we also check to see if the cooling fan is working properly. It's the same principle as the reason that cell phones get hot when you use them a lot.

The temperature and humidity of the environment must be controlled.

Medical equipment is especially vulnerable to humidity and high temperatures, and it's best to keep it in a temperature-controlled environment around 25 degrees.We've seen a lot of cases where the humidity in the workshop has been too high, causing the lens to fog up and affect the engraving.You can buy a thermometer and hygrometer to monitor the temperature and humidity, which is more reliable than just going by your feelings.

You can't cut corners on regular calibration.

Just as automobiles need to have their wheels realigned regularly, laser equipment must have its optical path calibrated once every three months.In particular, the medical industry demands a high degree of accuracy in labeling, so don't wait until you see blurry labels to start regretting your choices.Calibration is not difficult, and the manufacturer will provide instructions.

The consumables must be replaced on schedule.

The core components of the laser, such as the focusing lens and the laser tube, have a limited lifespan. Don't wait until they are completely broken before you replace them.It's like a toothbrush: you have to change it regularly. I suggest establishing a replacement schedule based on actual usage.I've had customers who have tried to save a few dollars by doing the repairs themselves, causing damage that ends up costing more to fix.

Training for the operators must be in place.

New employees must pass a practical examination before going on the job. Many mistakes are made by inexperienced workers because they don't understand the characteristics of the equipment.He suggests that warning stickers be placed on the machines to point out common problems, such as not adjusting the power parameters at will, or turning off the main power supply during a power outage.