What maintenance should one be aware of when using lasers for a long time?

The key to long-term stable operation of laser equipment is regular maintenance, including daily cleaning to prevent dust buildup, maintenance of the core components, and optimization of usage habits.The machine should be cleaned of dust, and the lenses of dirt, on a regular basis. The state of the cooling system should be monitored. The working parameters should be rationally set, and the ambient temperature and humidity controlled. An annual professional inspection should be scheduled.These details are effective in extending the life of the equipment and maintaining the precision of the carving, avoiding the high cost of repair.

Daily cleaning and dust prevention.

The surface of the body is clean.

The outside of the laser equipment and the control panel are the places most likely to accumulate dust. It is recommended that you wipe these down with a dry soft cloth once a week, paying special attention to the ventilation holes.If the environment is damp, you can use a small amount of specialized cleaner, but never let any liquid seep inside the machine.

Dust removal from the inside.

Every three months, open the side cover and use a compressed air gun (with pressure not exceeding 0.3MPa) to blow away the floating dust around the optical components.Remember to turn off the power before handling the lens.

Core component maintenance guide.

Laser lens care.

The lens is the "eye" of the equipment, and any fingerprints or oil stains will directly affect the quality of the engraving.When cleaning the CD, use a dust-free cotton swab dipped in alcohol, and wipe in a single direction, never back and forth.

Check cooling system.

The water cooler should have its filter changed regularly (once every six months is recommended) and the pipes should be checked for leaks.Air-cooled devices must ensure that the fans are working normally and that the vents are not blocked by debris.

Suggestions for optimizing usage habits.

The rationality of the parameters.

Don't blindly raise the power in an attempt to save time, or you'll reduce the lifespan of the laser tube.Remember to change the parameters for different materials. The reference values that the manufacturer provides are not for show.

Control of temperature and humidity.

The most important thing is to keep the equipment clean and dry.The temperature should be kept between 10 and 30 ° C, with a relative humidity of no more than 70 %.During the rainy season in the south, the piano should be turned on for half an hour each day to prevent moisture buildup.

Periodic professional inspection.

Even if the equipment is not malfunctioning, it is necessary to have the manufacturer do a complete check-up every year.The key is to check the degree of laser attenuation and the accuracy of the tracks. Don't try to get by on old parts when it's time to replace them.