Handheld ID Equipment User Guide

The training program provides detailed instructions on the correct operation of the handheld devices, as well as maintenance procedures. It includes such practical skills as how to turn the devices on, and how to select a scanning mode. It also provides solutions to common problems, such as when the device is unable to identify a target or the scanner fails. The training program helps users quickly master the devices, and thus improve their work efficiency.

Master the basics.

The system is turned on and the basic settings are made.

Press and hold the power button for three seconds to start the device. When using it for the first time, remember to choose a language and set the time zone.Under the "System Settings" menu, select "Scan Sensitivity" and adjust it to the middle setting. This will guarantee a fast recognition speed while avoiding false readings.

Which scanning mode to choose.

When scanning reflective surfaces, switch to the "strong light" mode. For scanning paper documents, it is best to use the "document priority" mode.Pressing the scan key for two seconds activates continuous scan mode, which is especially suited for processing a large number of express delivery slips.Remember to regularly clean the window with a soft cloth. Fingerprints and dust will reduce the success rate of identification.

Tips for daily maintenance.

Tips for battery maintenance.

We recommend charging your phone when the battery level drops below 20 %, and charging it once a month when not in use.If the device becomes hot while charging, stop using it and place it in a cool place. This could be caused by an incompatible charger.

Storage precautions.

The most important thing about storing equipment is to keep it away from moisture and high temperatures, and to remove batteries.The lens should be kept in a shock-proof case when not in use, and the protective cap should be used when the lens is not in use.

Quickly resolve common problems.

What if the scanner doesn't respond?

First check to see if the lens protector has been removed, and then restart the camera.If that still doesn't work, you can reset it to its original factory settings.Be sure to keep important data. If the speed of identification slows down, remember to clean up the memory and delete history records from three months ago.

The results were often wrong.

The light may be too dark, or the angle may be wrong. Try adjusting the angle to about 60 degrees.If the barcode is unclear, wipe it gently with an alcohol swab.Upgrading to the latest version of the operating system can also solve many problems related to identification.

The equipment suddenly went down.

Don't rush out to get it repaired. You can solve most problems by poking a paper clip into the reset hole.If the computer crashes frequently, check to see if you have installed any third-party software that is incompatible with the system.In winter, be sure to keep the battery warm. The performance of batteries declines markedly at low temperatures.