What to Do About Excess Laser Radiation?

What should you do if you have a laser radiation excess problem? We provide a three-step emergency procedure, covering steps for handling laser radiation excesses, emergency measures, and safety inspection points. This will help you to quickly reduce risks, ensure personnel safety, and guarantee normal equipment operation.

Quick response when laser radiation exceeds standards.

If you find your laser equipment showing abnormal radiation levels, don't panic! The most important thing is to stay calm and immediately cut off the power.Don't think of "trying again," because the problem could get worse.Remember to clear the area first, especially making sure that no one looks directly into the laser beam.

Check the status of equipment and the environment.

When the power is off, check the outer casing for any cracks or leaks.If it's an industrial laser, then one can touch the surface of the equipment (being careful not to get burned), and if the temperature is too high, this may be a result of a malfunction in the heat dissipation system.They also look at the surrounding environment, checking for reflective objects or moisture that might interfere with the laser beam and indirectly cause the radiation to exceed safe levels.

Temporary protective and isolation measures.

If the equipment can't be repaired quickly, the area must be sealed off.The laser beam can be covered with a thick, light-proof cloth, or the area of radiation can be blocked off with metal plates.If you have a laser printer at home, unplug it and move it to an empty corner, and don't let your child or pet get near it.

Marking out dangerous areas.

Use red tape or warning signs to mark off a one-meter exclusion zone around equipment, especially in laboratory or factory scenes.If protective goggles are available, make sure that those who have to go into the area are properly equipped.

Contact a professional to conduct the test.

After the simple processing, it is necessary to find a professional organization to test it.Don't believe what you read on the web about "calibration tutorials." Laser equipment involves precision optical components, and random adjustment of parameters could completely destroy the machine.When calling the after-sales service number of the manufacturer, be sure to explain the symptoms in detail, such as "the power meter suddenly showed a spike in the reading" or "I smelled something burning while it was working," as these details will help engineers pinpoint the problem.

Store unusual data records.

Remember to take photos or videos during the process, especially of the screen when the system is issuing an alarm.The information is not only important for post-purchase maintenance, but can also be used if the car needs to be repaired under warranty.If the equipment is in a factory, the operating log should be exported to make it easier to determine whether the problem was operator error or a hardware failure.